You are here:
- Home
- Water Feature & Pond Accessories
- 6 LED light with Low Voltage Water Feature Transformer
SKU: 6105
6 LED light with Low Voltage Water Feature Transformer
- This 6 bulb LED light is suitable for all of our water features. With a two pin water tight connector and 8 meters of cableLight head – Diameter 30mmCable Length – 8 meters
- We always recommended keeping transformers either indoors or inside a weatherproof box, this will prolong the life of the transformer
- Female connector with two holes
- AC cord with 2 metres of cable and UK 3 pin plug
The total length of the light & transformer is 8meters
You may also like
This 6 bulb LED light is suitable for all of our water features. With a two pin water tight connector and 2 meters of cable.
You can add a 6 meter extension cable if required.
Light head - Diameter 30mm
Cable Length - 2 Meters
1500 L/H Pump
Water Feature Pump - 1500 L/H - mains powered
Our best range of pumps for powering water features. They come in a wide range of sizes and the design of the pump does vary depending on the litres per hour (LPH) of the pump. These pumps are supplied without fountainheads or other accessories.
Please note - Max Delivery Head is the maximum height the water will reach if it's going up a pipe. This is based on the pipe being 1" in diameter.
Maximum Performance | Maximum Delivery Head | Power Consumption | Outlet Hosetail Size | Multi Size Hosetail | Cable Length | Dimensions |
1500 L/H |
2.5 Metres | 20 watts | 1/2" , 5/8" , 3/4" | Yes (3/4" and 1") | 10m |
3-1 Pipe Connector
Our 3-1 Pipe Connectors are designed to fit both 1/2 inch pipe and 3/4 inch pipe. It also allows you to control the water flow on each of the sections.
The idea of a 3-1 connector is to allow you to run up to three water features/ fountains off one pump.
If you would like only two features running then you can turn the flow off completely on the third connector
Replacement water feature pump
This is the pump only which is in our water feature pump kit
1000LPH
With 8 meters of cable that goes to the transformer via a 2 pin watertight connection.
The other shorter cable is for the light.
Great for spaces or if yours does pack up after being let running dry or blocked up from dirt just replace the pump with out having to buy the whole kit.
1200LPH PUMP
Water Feature Pump – 1200 L/H – mains powered
Our best range of pumps for powering water features. They come in a wide range of sizes and the design of the pump does vary depending on the litres per hour (LPH) of the pump. These pumps are supplied without fountainheads or other accessories.
Please note – Max Delivery Head is the maximum height the water will reach if it’s going up a pipe. This is based on the pipe being 1″ in diameter.
Maximum Performance | Maximum Delivery Head | Power Consumption | Outlet Hosetail Size | Multi Size Hosetail | Cable Length | Dimensions |
1200 L/H | 2 Metres | 20 watts | 1/2″ , 5/8″ , 3/4″ | Yes (3/4″ and 1″) | 10m |
FOUNTIAN NOZZLE SET
2000 L/H Pump
Water Feature Pump - 750 L/H - mains powered
Our best range of pumps for powering water features. They come in a wide range of sizes and the design of the pump does vary depending on the litres per hour (LPH) of the pump. These pumps are supplied without fountainheads or other accessories.
Please note - Max Delivery Head is the maximum height the water will reach if it's going up a pipe. This is based on the pipe being 1" in diameter.
Maximum Performance | Maximum Delivery Head | Power Consumption | Outlet Hosetail Size | Multi Size Hosetail | Cable Length | Dimensions |
2000 L/H |
Yes (3/4" and 1") | 10m |
Roll of 30m aqua pipe 1 1/4"
outdoor mist maker
Outdoor Mini mist maker with 10 meter cable
6 Bulb LED - 8 meters
This 6 bulb LED light is suitable for all of our water features. With a two pin water tight connector and8 meters of cable
Light head - Diameter 30mm
Cable Length - 8 meters
Chlorine Tablets pack of 12
Chlorine Tablets 20g pack of 12
Why not keep your water feature looking amazing for years and years to come by keeping the water clean and fresh with our 20g Chlorine tablets.
Simply add 1 x slow release Chlorine Tablet to your water feature once a month (if needed) The tablet will get to work quicker if you leave the fountain running for 12 hours.
Important Note: Please ensure you read and understand fully the safety labelling and instructions provided with your purchase. Always wear gloves when handling chlorine. Keep out of reach of children.
Water Feature Cleaner ECO Friendly 500ml
Water Feature Clear 500ml Green water and blanket weed treatment Ecopond Water Feature Clear is an eco-friendly approach to the problem of green water, algae and blanket weed in fountains, barrel features and small ponds. The product works by starving the algae and changing the water chemistry to inhibit algae growth and provide good water clarity.
Benefits of Water Feature Clear: o Controls algae, green water & blanket weed in o water features. o Helps eliminate stagnant odours and reduces the o need for cleaning o Safe for all feature types including stainless steel, stone and wood. o Clean, simple and easy to use. o Safe for plants, humans, pets and wildlife. Dosage: 30ml as an initial dose for features up to 20 litres 10ml per week thereafter For larger features or ponds increase dosing proportionally.
Water Feature Clear is formulated from micro-organisms grown on straw which is produced under the F.A.A.B (Farm Assured Scheme). No herbicides or pesticides are introduced in the growing process, or during the production process.