Basalt Plinth XL
Basalt plinth XL
Why not add a plinth to your water feature not only giving you high but adding a extra noise with the dripping water effected that the plinth adds to the basalt slabs
35/45cm x 10cm high
You are here:
Replacement Low Voltage Water Feature Transformer
- Ideal for replacing faulty/blown transformers on garden water features
- We always recommended keeping transformers either indoors or inside a weatherproof box, this will prolong the life of the transformer
- Female connector with two holes
- AC cord with 3 metres of cable and UK 3 pin plug
- 21.6 VA
You may also like
3-1 Pipe Connector
Our 3-1 Pipe Connectors are designed to fit both 1/2 inch pipe and 3/4 inch pipe. It also allows you to control the water flow on each of the sections.
The idea of a 3-1 connector is to allow you to run up to three water features/ fountains off one pump.
If you would like only two features running then you can turn the flow off completely on the third connector
6 Bulb LED - 8 meters
This 6 bulb LED light is suitable for all of our water features. With a two pin water tight connector and8 meters of cable
Light head - Diameter 30mm
Cable Length - 8 meters
Fountain kit with light
Our new fountain pump kit has a 1200lph pump and 4 heads so you can change how you'd like the fountain to come out.
Great for ponds,
It also comes with a fully waterproof spot light which look great at night or under the water.
It has 10 meters of cable with a 3 pin plug
louts bowl not included
Choose Feature Light Colour
6 LED light with Low Voltage Water Feature Transformer
- This 6 bulb LED light is suitable for all of our water features. With a two pin water tight connector and 8 meters of cable Light head – Diameter 30mm Cable Length – 8 meters
- We always recommended keeping transformers either indoors or inside a weatherproof box, this will prolong the life of the transformer
- Female connector with two holes
- AC cord with 2 metres of cable and UK 3 pin plug
Replacement Low Voltage Water Feature Transformer
- Ideal for replacing faulty/blown transformers on garden water features
- We always recommended keeping transformers either indoors or inside a weatherproof box, this will prolong the life of the transformer
- Female connector with two holes
- AC cord with 3 metres of cable and UK 3 pin plug
- 21.6VA
Solar pump 1560LH
Our solar power pump will pump 980LH to 1560LH by turning it up or down depending how much power you need, plenty of power to run any of our water features.
Our solar pump has its own battery pack so in stead of its just running as and when.
It charges up the battery pack, so you can run it whenever you would like. Whether its all day long or switching it on in the long summer evening to hear the relaxing sounds of water long into the night.
The pump comes with a nozzer set, so can be placed into a pond or reservoir for a stunning instant water feature which even oxygenates the water in a pond perfect for fish ponds and koi pools to give the fish a high level of oxygen.
Rainbow sandstone round plinth
RAINBOW SANDSTONE PLINTH’S CAN BE ADDED TO A WATERFEATURE TO GIVE IT EXTRA HIEGHT AND GIVE YOU DRIPPING WATER WHICH WILL LOOK AND SOUND GREAT.
ASLO GREAT IF YOU USING PEBBLES AS IT LIFTS THE FEATURE UP ENOUGH SO NOT HINDEN BY PEBBLES SO AS SEEN IN SECOND AND THIRD PHOTOS.
WHY NOT ADD TWO OR THREE TO MAKE YOUR WATER FEATURE REALLY STAND OUT.
PLINTH ONLY BOWL NOT INCLUDED
DIAMETER = 200MM
HGHT = 100MM
Choose Feature Light Colour
Replacement LED 6 blub
This 6 bulb LED light is suitable for all of our water features. With a two pin water tight connector and 2 meters of cable.
You can add a 6 meter extension cable if required.
Light head - Diameter 30mm
Cable Length - 2 Meters
3-1 Pipe Connector
Our 3-1 Pipe Connectors are designed to fit both 1/2 inch pipe and 3/4 inch pipe. It also allows you to control the water flow on each of the sections.
The idea of a 3-1 connector is to allow you to run up to three water features/ fountains off one pump.
If you would like only two features running then you can turn the flow off completely on the third connector
Lotus bowl Grey complete fountain
This water feature is perfect for a decking area or patio in your garden - being easy to set up with zero maintenance. One simple 12V plug is all that is required to make the fountain work. The fountain itself has several different settings from a dome like fountain to the classic up-shoot fountain (as seen in the pictures)
Features
- Perfect for patios, decking areas and small gardens
- Adds a sense of calm and tranquility
- Includes water feature pump with spout and LED white spotlight
- Perfect for lighting up your garden on those summer nights
- Self contained - No need for a constant water supply
- Low maintenance
- Child and pet safe
- Made from durable plasstone
- Makes a great patio pond on its own for fish or to bring a bit of wildlife to your garden when planted with some beautiful pond plants
What's In The Box
- Lotus Grey Finish Bowl Patio Pond
- 1000LPH Low voltage pump
- 12 White LED spotlight
Dimensions
Diameter: 80cm / 31.5"
Height: 36cm / 14.1''
Red polished river pebbles
Perfect for adding the finishing touch to a new or existing water feature. Scatter a couple of bags of polished river pebbles around the base and hide away any plastic buckets or cables.
| Product | Size | Weight | Colour | Material |
| Pebbles | 5-8cm Dia | 15kgs per bag | Red | Natural river pebble |
- - 15KG bag
- - Polished finish (they do not need washing unlike most aggregates)
- - Perfect for decorating areas of the garden and especially water features
- - These are a natural product sourced from river beds, cleaned and then polished